ingegarcia
06-15 03:40 PM
Will continue contributing at least till guys stuck in the backlog centers get to file their I-140s.
What about the option
Refiling LC in PERM due to .... changing jobs, etc
What about the option
Refiling LC in PERM due to .... changing jobs, etc
wallpaper The veil amp; tiara: “The veil is
needhelp!
10-25 11:23 AM
If you live in DFW, you are wanted at the IV booth!
raidohri
05-30 08:44 PM
Please do send the fax to all senators, if you have not send the webfax to all senators, please do so now
2011 Kate Middleton
acecupid
08-05 09:39 PM
http://www.uscis.gov/USCIS/Office%20of%20Communications/Homepage/uscisdotgov_mockup_28july09.ai.pdf
more...
punjabi
09-29 01:02 PM
My suggestion is don't ask for a referral for a good consulting company.
If two consultants are working through a consultancy, their own opinion might differ drastically about the same company. These desi consultancies treat everybody differently.
They do not have set standards. Even if they have some on papers, I have seen none so far who follows those.
They say we will give you 90% of your share. They meet you with smiling face and they talk very politely. And when you ask the Work Order to confirm your rate, they very conveniently change the figure and fax it over to you. This is not an assumption, I have seen it happening before my eyes.
And most of all, they do not feel any remorse or guilt at all.
So, please look for your own. Be careful. Avoid the ones who smile constantly even while chewing the biggest burger on their plate. :-)
Find an American company. They know their state laws and are afraid to commit anything against those.
Good luck, my friend!
Guys, Suggest me a good consulting company. My employer is OK until now and he just started demanding money even for H1 extensions. I am seriously thinking of moving. Please suggest good desi consulting companies who can support my GC and keep min billing. I have a very good project in hand
If two consultants are working through a consultancy, their own opinion might differ drastically about the same company. These desi consultancies treat everybody differently.
They do not have set standards. Even if they have some on papers, I have seen none so far who follows those.
They say we will give you 90% of your share. They meet you with smiling face and they talk very politely. And when you ask the Work Order to confirm your rate, they very conveniently change the figure and fax it over to you. This is not an assumption, I have seen it happening before my eyes.
And most of all, they do not feel any remorse or guilt at all.
So, please look for your own. Be careful. Avoid the ones who smile constantly even while chewing the biggest burger on their plate. :-)
Find an American company. They know their state laws and are afraid to commit anything against those.
Good luck, my friend!
Guys, Suggest me a good consulting company. My employer is OK until now and he just started demanding money even for H1 extensions. I am seriously thinking of moving. Please suggest good desi consulting companies who can support my GC and keep min billing. I have a very good project in hand
bobzibub
01-19 06:13 PM
They have too few people to do the job. When your app switches to priority processing it gets to another queue. When it is near the end of the 15 days they send an RFE simply because they can't complete it in time. Now they have at least another 15+ days to complete the thing.
more...
chanduv23
04-27 02:58 PM
you may not get much ifnormation from Infopass - you can go for infopass for issues like FP or Name check status or similar things.
Well Don't don't assume that "pre adjudicated" means everything with the case is over and the ONLY factor is visa number unavailability.
Pre adjudicated means - things are fine as of now.
Well Don't don't assume that "pre adjudicated" means everything with the case is over and the ONLY factor is visa number unavailability.
Pre adjudicated means - things are fine as of now.
2010 detail of Kate Middleton#39;s
ak_manu
10-20 12:29 PM
Thanks!
Appreciate your response.
Appreciate your response.
more...
drona
07-12 02:39 PM
He always says he is pro legal immigration and that he is a champion of immigrants. He won't know what that means until he meets us! :) Let's give him some attention!
hair Kate Middleton#39;s wedding
alterego
12-08 04:13 PM
It will not have much impact if any president comes in the case of immigration. Anyhow most of them are not going to Veto. It is the congress who plays important role. President can just initiate the process. Bush tried his best to pass some immigration reform but divided congress defeated all the bills. Who is the reason? Not just anti immigrants but also pro immigrant groups. Expectation from pro immigrants was too much and in some cases impractical. Anti immigrants used those and defeated every time. Also anti immigrants used division in various groups like legal vs illegal, high skilled vs low skilled and H1 vs green card. Some unbiased leader need to bring a bill which should work compromise at the same time that compromise should benefit all the groups. But unfortunately most congressmen are busy in other works. Next congress is critical for any immigration reform
Agreed. However due to the Iraq war. Bush is very unpopular. His conservative base revolted and the republican party did not tow the line and did not support him on this issue, in truth the other side was more helpful than he could have hoped. I agree Bush tried his best, but if he tried in 2001 the result would almost certainly have been different.
A new president comes with a mandate and some fresh political capital. It just depends on what issue he wants to start spending it upon. Given how controversial and virtually radioactive this issue has become, I would not blame the next president if they started with something else. However if things start to go well then he/she could start pushing for this and he/she could provide political cover for congress on this.
Our issue ought to be less controversial but in congress, anything pro-immigration seems to be sneered at right now. Everyone is set on this enforcement first policy and don't want to hear a thing else. It is unfortunate.
All said, we and our issues cannot wait until 2009. We have to push and try to get this done whenever an opportunity come up. Even after 2009 nothing is guaranteed and we might just find that things get worse too, especially if there is an economic downturn.
That is why we need to push hard now.
Agreed. However due to the Iraq war. Bush is very unpopular. His conservative base revolted and the republican party did not tow the line and did not support him on this issue, in truth the other side was more helpful than he could have hoped. I agree Bush tried his best, but if he tried in 2001 the result would almost certainly have been different.
A new president comes with a mandate and some fresh political capital. It just depends on what issue he wants to start spending it upon. Given how controversial and virtually radioactive this issue has become, I would not blame the next president if they started with something else. However if things start to go well then he/she could start pushing for this and he/she could provide political cover for congress on this.
Our issue ought to be less controversial but in congress, anything pro-immigration seems to be sneered at right now. Everyone is set on this enforcement first policy and don't want to hear a thing else. It is unfortunate.
All said, we and our issues cannot wait until 2009. We have to push and try to get this done whenever an opportunity come up. Even after 2009 nothing is guaranteed and we might just find that things get worse too, especially if there is an economic downturn.
That is why we need to push hard now.
more...
amitga
03-21 10:38 AM
Please see my answers below.
I'm on H4. I have got an offer from a company and they will do my H1
I have few questions
1)How easy it is to transfer H1's to another company? What documents I need?
The process of trasfer is same as applying new H1. Only thing you need paystubs from the existing employer to trasfer H1.
2)Is it possible to convert back to h4? I have 2 kids so I might have to convert back to H4 from h1 if I cannot take the stress.
what documents do I need?Do I need to go out of US for this?
H1 to H4 trasfer is also possible, but again pay stubs are required.
3)Once back on H4, and in future If I want to get back on h1, Am I subject to cap?
Yes you will be subject to cap.
I'm on H4. I have got an offer from a company and they will do my H1
I have few questions
1)How easy it is to transfer H1's to another company? What documents I need?
The process of trasfer is same as applying new H1. Only thing you need paystubs from the existing employer to trasfer H1.
2)Is it possible to convert back to h4? I have 2 kids so I might have to convert back to H4 from h1 if I cannot take the stress.
what documents do I need?Do I need to go out of US for this?
H1 to H4 trasfer is also possible, but again pay stubs are required.
3)Once back on H4, and in future If I want to get back on h1, Am I subject to cap?
Yes you will be subject to cap.
hot kate middleton tiara for
Kitiara
10-16 10:27 AM
Well done that man!
more...
house Kate Middleton#39;s wedding hair:
snathan
02-11 12:20 AM
Please contribute
http://immigrationvoice.org/forum/showthread.php?t=23597&page=1000
http://immigrationvoice.org/forum/showthread.php?t=23597&page=1000
tattoo Kate Middleton#39;s Wedding Hair:
dixie
09-25 02:38 PM
I see no harm in contacting him; but your excitement about Chandrasekharan seems curious to me. When people who have themselves immigrated from India (who now have GC/citizenship) are so indifferent about us, how can you expect a second generation indian journalist to "understand" our problems ? He does not seem to have done any articles on immigration; so there is no objective way for us to say whether he is really sympathetic to us or not.
Remember that even anti-immigration organizations like numbersUSA have lots of members who are immigrants themselves or have immigrant parents.
Any comments from Core Team regarding contacting Rajiv ? His parents are immigrants from India,so he will understand the sufferings of legal immigrants !
I think it is better to contact him.
Guys...Any comments ?
Remember that even anti-immigration organizations like numbersUSA have lots of members who are immigrants themselves or have immigrant parents.
Any comments from Core Team regarding contacting Rajiv ? His parents are immigrants from India,so he will understand the sufferings of legal immigrants !
I think it is better to contact him.
Guys...Any comments ?
more...
pictures ivanka trump wedding shoes.
rolrblade
07-20 01:29 PM
My attorney said e-notice is fine and applied.
but in enotice it is written
Please note that this e-mail message is being sent as a
courtesy and cannot be used as evidence of nonimmigrant
status. Nor can this message be used as evidence to procure
an immigrant visa
I am worried if my packages comes back after aug 17?
read carefully to what Superdude wrote...... your answre is in there.
To file I-485 you need a I-140 RECEIPT NOTICE. You dont need an approved I-140 to file 485. If you attached your I-140 receipt notice then you are fine.
but in enotice it is written
Please note that this e-mail message is being sent as a
courtesy and cannot be used as evidence of nonimmigrant
status. Nor can this message be used as evidence to procure
an immigrant visa
I am worried if my packages comes back after aug 17?
read carefully to what Superdude wrote...... your answre is in there.
To file I-485 you need a I-140 RECEIPT NOTICE. You dont need an approved I-140 to file 485. If you attached your I-140 receipt notice then you are fine.
dresses “Kate Middleton #39;To Borrow
waiting4gc02
11-16 10:34 AM
Is it required to inform USCIS after you change jobs after 180 days using
AC21?
Is it safe to say that if your GC applying company does NOT revoke I-140 after you change jobs, that you are OK not to tell USCIS about your change ?
Thoughts???
AC21?
Is it safe to say that if your GC applying company does NOT revoke I-140 after you change jobs, that you are OK not to tell USCIS about your change ?
Thoughts???
more...
makeup wedding tiara. While Kate#39;s
Charleh
05-28 05:14 AM
You can bind them quite easily, assuming your data sources implement the correct interfaces (I believe IBindable/IBindableList).
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
girlfriend kate middleton queen elizabeth
factoryman
02-09 07:21 PM
Congressmen from hi-tech SF and CA.
Rep. Lofgren (D - CA) : 16th District - San Jose
Rep. Eshoo (D- CA) : 14th District - San Francisco, San Jose, Santa Cruz
Rep. Pelosi (D - CA) : 8th District - San Francisco and north
That is why they may be using this tactic to bring pressure from hospitals from that area. Anyone from here spoke or wrote to these congressmen, that I posted in the other thread (http://immigrationvoice.org/forum/showpost.php?p=47625&postcount=1) at IV.
Rep. Lofgren (D - CA) : 16th District - San Jose
Rep. Eshoo (D- CA) : 14th District - San Francisco, San Jose, Santa Cruz
Rep. Pelosi (D - CA) : 8th District - San Francisco and north
That is why they may be using this tactic to bring pressure from hospitals from that area. Anyone from here spoke or wrote to these congressmen, that I posted in the other thread (http://immigrationvoice.org/forum/showpost.php?p=47625&postcount=1) at IV.
hairstyles Kate Middleton Prince William
ashishgour
12-06 12:01 PM
bump
Not yet received FP notices for me and my wife....
Case was transferred from CSC to TSC .
I485 filed on July 23rd.
Not yet received FP notices for me and my wife....
Case was transferred from CSC to TSC .
I485 filed on July 23rd.
PDOCT05
10-30 04:40 PM
Update to my case. Submitted Originally on July 2nd for I-140/I-1485. USCIS Sent back everything on Aug�28 stating Original Labor missing. Attorney sent back the case on Sep 11th with a cover letter that the labor could be requested by USCIS to DOL. The copy of ETA9089 & certified online copy was attached with the original case. I was hoping that they will accept the case this time as I have seen similar cases where they accept the case and issue RFE at a later date. Attorney also mentioned that he got receipts for similar cases like this.
Today- USCIS returned back the application (both I-140 & I-1485) with the letter saying that the dates are not current even though the date stamped was July 2nd on the case. I talked to attorney and he is planning to send the case back to them giving examples on the similar cases and putting a strong cover letter. The final plan of action still needs to be finalized. Looks like I am the unlucky one presently from the batch of 400 K applications. I don�t know how to express my pain, agony frustration I have gone through the last 4 months. I don�t have words to express myself but just feel so terribly sad and disappointed from this whole process I have been going through... I am also planning to contact the local senators /congressman and sought their help & attention.
I am very sorry to see this happened to you. Please talk to your lawyer and ask him to handle it good. Contacting local senators/Congressman will help you..good luck.
Today- USCIS returned back the application (both I-140 & I-1485) with the letter saying that the dates are not current even though the date stamped was July 2nd on the case. I talked to attorney and he is planning to send the case back to them giving examples on the similar cases and putting a strong cover letter. The final plan of action still needs to be finalized. Looks like I am the unlucky one presently from the batch of 400 K applications. I don�t know how to express my pain, agony frustration I have gone through the last 4 months. I don�t have words to express myself but just feel so terribly sad and disappointed from this whole process I have been going through... I am also planning to contact the local senators /congressman and sought their help & attention.
I am very sorry to see this happened to you. Please talk to your lawyer and ask him to handle it good. Contacting local senators/Congressman will help you..good luck.
wizpal
08-12 10:46 AM
with your efforts. I hope you don't get banned...
what makes u think that he would be banned for asking such questions - if IV is busy may be some senior members can answer.
what makes u think that he would be banned for asking such questions - if IV is busy may be some senior members can answer.
Комментариев нет:
Отправить комментарий